Silent Pump Options for Diesel Heaters

Option 1 - Silent Pump For Internal Mounting. 

-Black ABS IP54 enclosure. 

-Fitted with anti siphon valve so can be mounted above or below the fuel tank. 

-Dial and leds can be moved from top to the side at request.

-145mm including tabs (120mm without) long x 80mm wide x 55mm high. The fuel trim knob adds 20mm to the height.

£135 + pp

Option 2 - Low Profile Silent Pump. 

-Black ABS IP54 enclosure. 

-Rear facing dial/leds for mounting inside All-In-One heaters (please check dimensions). 

-Fitted with anti siphon valve so can be mounted above or below fuel tank. 

-Dial and leds can be moved from top to the side at request. 

-145mm including tabs (120mm without) long x 65mm wide x 40mm high. External anti siphon valve adds 30mm and barbed fitting adds a further 30mm.

£145 + pp

Option 3 - Marine Spec Silent Pump. 

-IP65 cast aluminium box to comply with marine regulations. 

-Fitted with anti siphon valve so can be mounted above or below fuel tank. 

-Dial and leds can be moved from top to the side at request. 

-150mm including tabs (110mm without) long x 90mm wide x 55mm high. The fuel trim knobs adds 20mm to the height. 
£160 + pp

NEW RELEASE Option 4 - IP68 Silent Pump For External Mounting. 

-Waterproof to 1.5m depth, ideal for river crossings. 

-Fitted with anti-siphon valve so can be mounted above or below fuel tank. 

-Dial and leds are inside or option for remote dial/led to any length.

-Impact-resistant polycarbonate case with silicone gasket. 
-Flame retardant V-1 rating.

-120mm long x 70mm wide x 48mm high. 
£170 + pp
With remote dial/led to any length £195 + pp.

Custom build? You tell me what your requirements are, and I'll quote and build it!  

See the Pump Gallery below for pics and idea's.
 

Optional Extra's

2x 90 Degree fittings +£10.

6mm OD Barb fittings (std is 4mm) ideal for 3/16th or 5mm ID fuel line and rubber joiners +£10.

Remote dial/leds - This can be added to any option pump and any length lead you need +£25.

Needle Valve - This is needed for fuel tanks over 60cm above pump/heater to reduce head pressure +£35.

Further details

Four wires to connect. Red to +12V, Blue to Neg, Green and Yellow wires connect to your heaters pump plug wires any way around. 

Works with 12v and 24v heaters. (24v heaters +£10)

Can be mounted in any orientation.

Fully compatible with the Afterburner controller.

The dial on the top allows for fine tuning if you wish. This is done by referencing a CO meter reading. 

The dial is also used if you want to burn a different fuel to increase or decrease injection quantity per pulse.

I can set up for any size heater that uses a knocking pump.

This pump can happily pump - Diesel, Kerosene, Paraffin, Jet fuel, without increased wear to internal parts.

1 year warranty and full after sales technical support.

This is a pump for life, and fully serviceable.

Paypal pay in 3 available: Buy Now Pay Later | Installment Payments | PayPal UK

Lead time: 2 days to 2 weeks. Contact for latest.

For inquiries and orders please email: jamesbrowningsmith@yahoo.co.uk